Effect of textural characteristics on the catalytic performance of supported KCoMoS2 in the synthesis of higher alcohols from syngas

The influence of textural characteristics on the catalytic performance of supported KCoMoS₂ catalysts was explored to provide essential information for the design of better catalysts for the synthesis of higher alcohols (C₁–C₅) from syngas. Syngas conversion was carried out over KCoMoS₂ catalysts supported on various mesoporous (alumina and carbon-coated alumina) and microporous (two types of powdered activated carbons) materials. The experimental results show that catalysts supported over microporous materials exhibit higher catalytic activity in HAS from syngas than catalysts based on mesoporous materials.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

Synchronizing Substrate Activation Rates in Multicomponent Reactions with Metal–Organic Framework Catalysts

A study on the influence of the cation coordination number, number of Lewis acid centers, concurrent existence of Lewis base sites, and structure topology on the catalytic activity of six new indium MOFs, has been carried out for multicomponent reactions (MCRs). The new indium polymeric frameworks, namely [In₈(OH)₆(popha)₆(H₂O)₄]?3 H₂O ( InPF‐16 ), [In(popha)(2,2′‐bipy)]?3 H₂O ( InPF‐17 ), [In₃(OH)₃(popha)₂(4,4′‐bipy)]?4 H₂O ( InPF‐18 ), [In₂(popha)₂(4,4′‐bipy)₂]?3 H₂O ( InPF‐19 ), [In(OH)(Hpopha)]?0.5 (1,7‐phen) ( InPF‐20 ), and [In(popha)(1,10‐phen)]?4 H₂O ( InPF‐21 ) (InPF=indium polymeric framework, H₃popha=5‐(4‐carboxy‐2‐nitrophenoxy)isophthalic acid, phen=phenanthroline, bipy=bipyridine), have been hydrothermally obtained by using both conventional heating (CH) and microwave (MW) procedures. These indium frameworks show efficient Lewis acid behavior for the solvent‐free cyanosilylation of carbonyl compounds, the one pot Passerini 3‐component (P‐3CR) and the Ugi 4‐component (U‐4CR) reactions. In addition, InPF‐17 was found to be a highly reactive, recyclable, and environmentally benign catalyst, which allows the efficient synthesis of α‐aminoacyl amides. The relationship between the Lewis base/acid active site and the catalytic performance is explained by the 2D seven‐coordinated indium framework of the catalyst InPF‐17 . This study is an attempt to highlight the main structural and synthetic factors that have to be taken into account when planning a new, effective MOF‐based heterogeneous catalyst for multicomponent reactions.     

Hexametaphosphate‐Capped Silica Mesoporous Nanoparticles Containing CuII Complexes for the Selective and Sensitive Optical Detection of Hydrogen Sulfide in Water

Cu^II‐macrocycle functionalized hexametaphosphate‐capped silica mesoporous nanoparticles have been prepared and used for the selective and sensitive detection of hydrogen sulfide in aqueous environments. The possibility of using different metal complexes combined with different capping anions and choice of different dyes or other sensing molecules as indicators makes this new protocol highly appealing for the preparation of new sensing systems for sulfide detection in different environments.     

Stereoselective Preparation of Polyfunctional Alkenylindium(III) Halides and Their Cross‐Coupling with Unsaturated Halides

The direct insertion of indium powder to cycloalkenyl iodides in the presence of LiCl in THF allows the preparation of new highly functionalized cycloalkenylindium(III) derivatives. In addition, we discovered that, in contrast to many metal insertions to alkenyl iodides which proceed with a loss of stereochemistry, the insertion of In/LiCl to stereodefined (Z)‐ and (E)‐styryl iodides in THF proceeded with high retention of stereochemistry. After a palladium‐catalyzed cross‐coupling, various polyfunctionalized (Z)‐ and (E)‐stilbenes were obtained with high stereoselectivity.     

Na2S–Carbon Nanotube Fabric Electrodes for Room‐Temperature Sodium–Sulfur Batteries

A unique sodium sulfide (Na₂S) cathode is developed, which will allow the use of sodium‐free anodes for room‐temperature sodium–sulfur (Na–S) batteries. To overcome the “inert” nature of the Na₂S, a special cathode structure is developed by spreading the multi‐walled carbon nanotube (MWCNT)‐wrapped Na₂S particles onto MWCNT fabrics. Spectroscopic and electrochemical analyses reveal a series of polysulfide intermediates involved in the charge/discharge of the cell. The Na–S battery prepared in full discharge state with the Na₂S/MWCNT cathode provides a remarkable capacity of 500 A h kg^?1 (based on sulfur mass) after 50 cycles.     

Lossy mode resonance-based uniform core tapered fiber optic sensor for sensitivity enhancement

A lossy mode resonance (LMR)-supported fiber optic sensor in which a uniform fiber core is placed among two identical tapered regions, is investigated numerically. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) are considered as LMR active materials used to excite several lossy modes and gold and silver are used as surface plasmon resonance (SPR) active materials. In this probe design, a central uniform core coated with ITO/AZO is the active sensing region, whereas tapered regions are meant for bringing the incident angle close to the critical angle. The sensitivity of the present fiber optic bio-sensor is evaluated for first two LMRs utilizing both ITO and AZO separately, along with its variation with the taper ratio (TR). For ITO, the maximum sensitivity values are observed to be 18.425 μm RIU⁻¹ (refractive index unit) and 0.825 μm RIU⁻¹, corresponding to the first and second LMRs, respectively, at a TR of 1.6 and for AZO, equivalent values are 0.79 μm RIU⁻¹ and 0.35 μm RIU⁻¹, respectively, at a TR of 2.0. The results illustrate that the first LMR is more sensitive than the second LMR and the ITO-coated probe possesses greater sensitivity than the AZO-coated probe for both LMRs. Similarly, for the fiber optic SPR sensor, the maximum value of sensitivity is 5.6425 μm RIU⁻¹, in the case of gold and 5.0615 μm RIU⁻¹ in the case of silver, at a TR of 1.6. Hence, the result shows that the sensor with the present fiber optic probe design has around a 3-fold enhancement in sensitivity compared with conventional SPR sensors. This study will have applications in many sensing schemes where the requirement of large sensitivity is vital.     

In原子在GaAs(001)表面的成核与扩散研究

近年来,半导体量子点特别是InAs量子点的基本物理性质和潜在应用得到了广泛研究。许多研究者利用InAs量子点结构的改变以调制其光电特性。本文采用液滴外延法在GaAs(001)表面沉积了不同沉积量的In(3 ML、4 ML、5 ML),以研究In的成核机制和表面扩散。实验发现,随着In沉积量的增加,液滴尺寸(包括直径、高度)明显增大。不仅如此,在相同的衬底温度下,沉积量越大,液滴密度越大。利用经典成核理论,计算了GaAs(001)表面In液滴形成的临界厚度为0.57 ML,计算的结果与已报道的实验一致。从In原子在表面的迁移和扩散,以及衬底中Ga和液滴中的In之间的原子互混原理解释了In液滴形成和形貌演化的机理。实验中得到的In液滴临界厚度以及In液滴在GaAs(001)上成核机理,可以为制备InAs量子点提供实验指导。     

OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长，实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像，并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异，表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.